results.h

Go to the documentation of this file.

/*
 * Copyright 2012-2024 the Pacemaker project contributors
 *
 * The version control history for this file may have further details.
 *
 * This source code is licensed under the GNU Lesser General Public License
 * version 2.1 or later (LGPLv2.1+) WITHOUT ANY WARRANTY.
 */
#ifndef PCMK__CRM_COMMON_RESULTS__H
#define PCMK__CRM_COMMON_RESULTS__H

#ifdef __cplusplus
extern "C" {
#endif

// Lifted from config.h
/* The _Noreturn keyword of C11.  */
#ifndef _Noreturn
# if (defined __cplusplus \
      && ((201103 <= __cplusplus && !(__GNUC__ == 4 && __GNUC_MINOR__ == 7)) \
          || (defined _MSC_VER && 1900 <= _MSC_VER)))
#  define _Noreturn [[noreturn]]
# elif ((!defined __cplusplus || defined __clang__) \
        && (201112 <= (defined __STDC_VERSION__ ? __STDC_VERSION__ : 0)  \
            || 4 < __GNUC__ + (7 <= __GNUC_MINOR__)))
   /* _Noreturn works as-is.  */
# elif 2 < __GNUC__ + (8 <= __GNUC_MINOR__) || 0x5110 <= __SUNPRO_C
#  define _Noreturn __attribute__ ((__noreturn__))
# elif 1200 <= (defined _MSC_VER ? _MSC_VER : 0)
#  define _Noreturn __declspec (noreturn)
# else
#  define _Noreturn
# endif
#endif

#define CRM_ASSERT(expr) do {                                                \
        if (!(expr)) {                                                       \
            crm_abort(__FILE__, __func__, __LINE__, #expr, TRUE, FALSE);     \
        }                                                                    \
    } while(0)

/*
 * Function return codes
 *
 * Most Pacemaker API functions return an integer return code. There are two
 * alternative interpretations. The legacy interpration is that the absolute
 * value of the return code is either a system error number or a custom
 * pcmk_err_* number. This is less than ideal because system error numbers are
 * constrained only to the positive int range, so there's the possibility that
 * system errors and custom errors could collide (which did in fact happen
 * already on one architecture). The new intepretation is that negative values
 * are from the pcmk_rc_e enum, and positive values are system error numbers.
 * Both use 0 for success.
 *
 * For system error codes, see:
 * - /usr/include/asm-generic/errno.h
 * - /usr/include/asm-generic/errno-base.h
 */

// Legacy custom return codes for Pacemaker API functions (deprecated)

// NOTE: sbd (as of at least 1.5.2) uses this
#define pcmk_ok                       0

#define PCMK_ERROR_OFFSET             190    /* Replacements on non-linux systems, see include/portability.h */
#define PCMK_CUSTOM_OFFSET            200    /* Purely custom codes */
#define pcmk_err_generic              201
#define pcmk_err_no_quorum            202
#define pcmk_err_schema_validation    203
#define pcmk_err_transform_failed     204
#define pcmk_err_old_data             205

// NOTE: sbd (as of at least 1.5.2) uses this
#define pcmk_err_diff_failed          206

// NOTE: sbd (as of at least 1.5.2) uses this
#define pcmk_err_diff_resync          207

#define pcmk_err_cib_modified         208
#define pcmk_err_cib_backup           209
#define pcmk_err_cib_save             210
#define pcmk_err_schema_unchanged     211
#define pcmk_err_cib_corrupt          212
#define pcmk_err_multiple             213
#define pcmk_err_node_unknown         214
#define pcmk_err_already              215
/* On HPPA 215 is ENOSYM (Unknown error 215), which hopefully never happens. */
#ifdef __hppa__
#define pcmk_err_bad_nvpair           250 /* 216 is ENOTSOCK */
#define pcmk_err_unknown_format       252 /* 217 is EDESTADDRREQ */
#else
#define pcmk_err_bad_nvpair           216
#define pcmk_err_unknown_format       217
#endif

enum pcmk_rc_e {
    /* When adding new values, use consecutively lower numbers, update the array
     * in lib/common/results.c, and test with crm_error.
     */
    pcmk_rc_compression         = -1039,
    pcmk_rc_ns_resolution       = -1038,
    pcmk_rc_no_transaction      = -1037,
    pcmk_rc_bad_xml_patch       = -1036,
    pcmk_rc_bad_input           = -1035,
    pcmk_rc_disabled            = -1034,
    pcmk_rc_duplicate_id        = -1033,
    pcmk_rc_unpack_error        = -1032,
    pcmk_rc_invalid_transition  = -1031,
    pcmk_rc_graph_error         = -1030,
    pcmk_rc_dot_error           = -1029,
    pcmk_rc_underflow           = -1028,
    pcmk_rc_no_input            = -1027,
    pcmk_rc_no_output           = -1026,
    pcmk_rc_after_range         = -1025,
    pcmk_rc_within_range        = -1024,
    pcmk_rc_before_range        = -1023,
    pcmk_rc_undetermined        = -1022,
    pcmk_rc_op_unsatisfied      = -1021,
    pcmk_rc_ipc_pid_only        = -1020,
    pcmk_rc_ipc_unresponsive    = -1019,
    pcmk_rc_ipc_unauthorized    = -1018,
    pcmk_rc_no_quorum           = -1017,
    pcmk_rc_schema_validation   = -1016,
    pcmk_rc_schema_unchanged    = -1015,
    pcmk_rc_transform_failed    = -1014,
    pcmk_rc_old_data            = -1013,
    pcmk_rc_diff_failed         = -1012,
    pcmk_rc_diff_resync         = -1011,
    pcmk_rc_cib_modified        = -1010,
    pcmk_rc_cib_backup          = -1009,
    pcmk_rc_cib_save            = -1008,
    pcmk_rc_cib_corrupt         = -1007,
    pcmk_rc_multiple            = -1006,
    pcmk_rc_node_unknown        = -1005,
    pcmk_rc_already             = -1004,
    pcmk_rc_bad_nvpair          = -1003,
    pcmk_rc_unknown_format      = -1002,
    // Developers: Use a more specific code than pcmk_rc_error whenever possible
    pcmk_rc_error               = -1001,

    // Values -1 through -1000 reserved for caller use

    // NOTE: sbd (as of at least 1.5.2) uses this
    pcmk_rc_ok                  =     0

    // Positive values reserved for system error numbers
};


enum ocf_exitcode {
    PCMK_OCF_OK                   = 0,   

    // NOTE: booth (as of at least 1.1) uses this value
    PCMK_OCF_UNKNOWN_ERROR        = 1,   

    PCMK_OCF_INVALID_PARAM        = 2,   
    PCMK_OCF_UNIMPLEMENT_FEATURE  = 3,   
    PCMK_OCF_INSUFFICIENT_PRIV    = 4,   
    PCMK_OCF_NOT_INSTALLED        = 5,   
    PCMK_OCF_NOT_CONFIGURED       = 6,   

    // NOTE: booth (as of at least 1.1) uses this value
    PCMK_OCF_NOT_RUNNING          = 7,   

    PCMK_OCF_RUNNING_PROMOTED     = 8,   
    PCMK_OCF_FAILED_PROMOTED      = 9,   
    PCMK_OCF_DEGRADED             = 190, 
    PCMK_OCF_DEGRADED_PROMOTED    = 191, 

    /* These two are Pacemaker extensions, not in the OCF standard. The
     * controller records PCMK_OCF_UNKNOWN for pending actions.
     * PCMK_OCF_CONNECTION_DIED is used only with older DCs that don't support
     * PCMK_EXEC_NOT_CONNECTED.
     */
    PCMK_OCF_CONNECTION_DIED      = 189, 
    PCMK_OCF_UNKNOWN              = 193, 

#if !defined(PCMK_ALLOW_DEPRECATED) || (PCMK_ALLOW_DEPRECATED == 1)
    // Former Pacemaker extensions
    PCMK_OCF_EXEC_ERROR           = 192, 
    PCMK_OCF_SIGNAL               = 194, 
    PCMK_OCF_NOT_SUPPORTED        = 195, 
    PCMK_OCF_PENDING              = 196, 
    PCMK_OCF_CANCELLED            = 197, 
    PCMK_OCF_TIMEOUT              = 198, 
    PCMK_OCF_OTHER_ERROR          = 199, 

    PCMK_OCF_RUNNING_MASTER     = PCMK_OCF_RUNNING_PROMOTED,

    PCMK_OCF_FAILED_MASTER      = PCMK_OCF_FAILED_PROMOTED,

    PCMK_OCF_DEGRADED_MASTER    = PCMK_OCF_DEGRADED_PROMOTED,
#endif
};

// NOTE: sbd (as of at least 1.5.2) uses this
typedef enum crm_exit_e {
    // Common convention
    CRM_EX_OK                   =   0, 
    CRM_EX_ERROR                =   1, 

    // LSB + OCF
    CRM_EX_INVALID_PARAM        =   2, 
    CRM_EX_UNIMPLEMENT_FEATURE  =   3, 
    CRM_EX_INSUFFICIENT_PRIV    =   4, 
    CRM_EX_NOT_INSTALLED        =   5, 
    CRM_EX_NOT_CONFIGURED       =   6, 
    CRM_EX_NOT_RUNNING          =   7, 
    CRM_EX_PROMOTED             =   8, 
    CRM_EX_FAILED_PROMOTED      =   9, 

    // sysexits.h
    CRM_EX_USAGE                =  64, 
    CRM_EX_DATAERR              =  65, 
    CRM_EX_NOINPUT              =  66, 
    CRM_EX_NOUSER               =  67, 
    CRM_EX_NOHOST               =  68, 
    CRM_EX_UNAVAILABLE          =  69, 
    CRM_EX_SOFTWARE             =  70, 
    CRM_EX_OSERR                =  71, 
    CRM_EX_OSFILE               =  72, 
    CRM_EX_CANTCREAT            =  73, 
    CRM_EX_IOERR                =  74, 
    CRM_EX_TEMPFAIL             =  75, 
    CRM_EX_PROTOCOL             =  76, 
    CRM_EX_NOPERM               =  77, 
    CRM_EX_CONFIG               =  78, 

    // Custom
    CRM_EX_FATAL                = 100, 
    CRM_EX_PANIC                = 101, 
    CRM_EX_DISCONNECT           = 102, 
    CRM_EX_OLD                  = 103, 
    CRM_EX_DIGEST               = 104, 
    CRM_EX_NOSUCH               = 105, 
    CRM_EX_QUORUM               = 106, 
    CRM_EX_UNSAFE               = 107, 
    CRM_EX_EXISTS               = 108, 
    CRM_EX_MULTIPLE             = 109, 
    CRM_EX_EXPIRED              = 110, 
    CRM_EX_NOT_YET_IN_EFFECT    = 111, 
    CRM_EX_INDETERMINATE        = 112, 
    CRM_EX_UNSATISFIED          = 113, 

    // Other
    CRM_EX_TIMEOUT              = 124, 

    /* Anything above 128 overlaps with some shells' use of these values for
     * "interrupted by signal N", and so may be unreliable when detected by
     * shell scripts.
     */

    // OCF Resource Agent API 1.1
    CRM_EX_DEGRADED             = 190, 
    CRM_EX_DEGRADED_PROMOTED    = 191, 

    /* Custom
     *
     * This can be used to initialize exit status variables or to indicate that
     * a command is pending (which is what the controller uses it for).
     */
    CRM_EX_NONE                 = 193, 

    CRM_EX_MAX                  = 255, 
} crm_exit_t;

enum pcmk_exec_status {
    PCMK_EXEC_UNKNOWN = -2,     
    PCMK_EXEC_PENDING = -1,     
    PCMK_EXEC_DONE,             
    PCMK_EXEC_CANCELLED,        
    PCMK_EXEC_TIMEOUT,          
    PCMK_EXEC_NOT_SUPPORTED,    
    PCMK_EXEC_ERROR,            
    PCMK_EXEC_ERROR_HARD,       
    PCMK_EXEC_ERROR_FATAL,      
    PCMK_EXEC_NOT_INSTALLED,    
    PCMK_EXEC_NOT_CONNECTED,    
    PCMK_EXEC_INVALID,          
    PCMK_EXEC_NO_FENCE_DEVICE,  
    PCMK_EXEC_NO_SECRETS,       

    // Add new values above here then update this one below
    PCMK_EXEC_MAX = PCMK_EXEC_NO_SECRETS, 
};

enum pcmk_result_type {
    pcmk_result_legacy      = 0,  
    pcmk_result_rc          = 1,  
    pcmk_result_exitcode    = 2,  
    pcmk_result_exec_status = 3,  
};

int pcmk_result_get_strings(int code, enum pcmk_result_type type,
                            const char **name, const char **desc);
const char *pcmk_rc_name(int rc);

// NOTE: sbd (as of at least 1.5.2) uses this
const char *pcmk_rc_str(int rc);

crm_exit_t pcmk_rc2exitc(int rc);
enum ocf_exitcode pcmk_rc2ocf(int rc);
int pcmk_rc2legacy(int rc);
int pcmk_legacy2rc(int legacy_rc);

// NOTE: sbd (as of at least 1.5.2) uses this
const char *pcmk_strerror(int rc);

const char *pcmk_errorname(int rc);
const char *crm_exit_name(crm_exit_t exit_code);

// NOTE: sbd (as of at least 1.5.2) uses this
const char *crm_exit_str(crm_exit_t exit_code);

_Noreturn crm_exit_t crm_exit(crm_exit_t rc);

static inline const char *
pcmk_exec_status_str(enum pcmk_exec_status status)
{
    switch (status) {
        case PCMK_EXEC_PENDING:         return "pending";
        case PCMK_EXEC_DONE:            return "complete";
        case PCMK_EXEC_CANCELLED:       return "Cancelled";
        case PCMK_EXEC_TIMEOUT:         return "Timed Out";
        case PCMK_EXEC_NOT_SUPPORTED:   return "NOT SUPPORTED";
        case PCMK_EXEC_ERROR:           return "Error";
        case PCMK_EXEC_ERROR_HARD:      return "Hard error";
        case PCMK_EXEC_ERROR_FATAL:     return "Fatal error";
        case PCMK_EXEC_NOT_INSTALLED:   return "Not installed";
        case PCMK_EXEC_NOT_CONNECTED:   return "Internal communication failure";
        case PCMK_EXEC_INVALID:         return "Cannot execute now";
        case PCMK_EXEC_NO_FENCE_DEVICE: return "No fence device";
        case PCMK_EXEC_NO_SECRETS:      return "CIB secrets unavailable";
        default:                        return "UNKNOWN!";
    }
}

#ifdef __cplusplus
}
#endif

#endif