N_ 526 daemons/controld/controld_control.c N_("Pacemaker version on cluster node elected Designated Controller (DC)"), N_ 527 daemons/controld/controld_control.c N_("Includes a hash which identifies the exact changeset the code was " N_ 532 daemons/controld/controld_control.c N_("The messaging stack on which Pacemaker is currently running"), N_ 533 daemons/controld/controld_control.c N_("Used for informational and diagnostic purposes.") N_ 537 daemons/controld/controld_control.c N_("An arbitrary name for the cluster"), N_ 538 daemons/controld/controld_control.c N_("This optional value is mostly for users' convenience as desired " N_ 546 daemons/controld/controld_control.c N_("How long to wait for a response from other nodes during start-up"), N_ 547 daemons/controld/controld_control.c N_("The optimal value will depend on the speed and load of your network " N_ 552 daemons/controld/controld_control.c N_("Zero disables polling, while positive values are an interval in seconds" N_ 555 daemons/controld/controld_control.c N_("Polling interval to recheck cluster state and evaluate rules " N_ 557 daemons/controld/controld_control.c N_("Pacemaker is primarily event-driven, and looks ahead to know when to " N_ 566 daemons/controld/controld_control.c N_("Maximum amount of system load that should be used by cluster nodes"), N_ 567 daemons/controld/controld_control.c N_("The cluster will slow down its recovery process when the amount of " N_ 573 daemons/controld/controld_control.c N_("Maximum number of jobs that can be scheduled per node " N_ 577 daemons/controld/controld_control.c N_("How a cluster node should react if notified of its own fencing"), N_ 578 daemons/controld/controld_control.c N_("A cluster node may receive notification of its own fencing if fencing " N_ 588 daemons/controld/controld_control.c N_("Declare an election failed if it is not decided within this much " N_ 596 daemons/controld/controld_control.c N_("Exit immediately if shutdown does not complete within this much " N_ 604 daemons/controld/controld_control.c N_("If you need to adjust this value, it probably indicates " N_ 611 daemons/controld/controld_control.c N_("If you need to adjust this value, it probably indicates " N_ 617 daemons/controld/controld_control.c N_("*** Advanced Use Only *** Enabling this option will slow down " N_ 619 daemons/controld/controld_control.c N_("Delay cluster recovery for this much time to allow for additional " N_ 626 daemons/controld/controld_control.c N_("How long before nodes can be assumed to be safely down when " N_ 628 daemons/controld/controld_control.c N_("If this is set to a positive value, lost nodes are assumed to " N_ 647 daemons/controld/controld_control.c N_("How many times fencing can fail before it will no longer be " N_ 655 daemons/controld/controld_control.c N_("What to do when the cluster does not have quorum"), NULL N_ 660 daemons/controld/controld_control.c N_("Whether to lock resources to a cleanly shut down node"), N_ 661 daemons/controld/controld_control.c N_("When true, resources active on a node when it is cleanly shut down " N_ 673 daemons/controld/controld_control.c N_("Do not lock resources to a cleanly shut down node longer than " N_ 675 daemons/controld/controld_control.c N_("If shutdown-lock is true and this is set to a nonzero time " N_ 683 daemons/controld/controld_control.c N_("How long to wait for a node that has joined the cluster to join " N_ 685 daemons/controld/controld_control.c N_("Fence nodes that do not join the controller process group within " N_ 536 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate parameter to supply instead of 'port'"), N_ 537 daemons/fenced/pacemaker-fenced.c N_("some devices do not support the " N_ 546 daemons/fenced/pacemaker-fenced.c N_("A mapping of host names to ports numbers for devices that do not support host names."), N_ 547 daemons/fenced/pacemaker-fenced.c N_("Eg. node1:1;node2:2,3 would tell the cluster to use port 1 for node1 and ports 2 and 3 for node2") N_ 551 daemons/fenced/pacemaker-fenced.c N_("Eg. node1,node2,node3"), N_ 552 daemons/fenced/pacemaker-fenced.c N_("A list of machines controlled by " N_ 557 daemons/fenced/pacemaker-fenced.c N_("How to determine which machines are controlled by the device."), N_ 558 daemons/fenced/pacemaker-fenced.c N_("Allowed values: dynamic-list " N_ 567 daemons/fenced/pacemaker-fenced.c N_("Enable a base delay for fencing actions and specify base delay value."), N_ 568 daemons/fenced/pacemaker-fenced.c N_("Enable a delay of no more than the " N_ 576 daemons/fenced/pacemaker-fenced.c N_("Enable a base delay for " N_ 578 daemons/fenced/pacemaker-fenced.c N_("This enables a static delay for " N_ 590 daemons/fenced/pacemaker-fenced.c N_("The maximum number of actions can be performed in parallel on this device"), N_ 591 daemons/fenced/pacemaker-fenced.c N_("Cluster property concurrent-fencing=true needs to be configured first." N_ 597 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of 'reboot'"), N_ 598 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones.\n" N_ 603 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for reboot actions instead of stonith-timeout"), N_ 604 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal." N_ 609 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the 'reboot' command within the timeout period"), N_ 610 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 617 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of \'off\'"), N_ 618 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones." N_ 623 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for off actions instead of stonith-timeout"), N_ 624 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal." N_ 629 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the 'off' command within the timeout period"), N_ 630 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 637 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of 'on'"), N_ 638 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones." N_ 643 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for on actions instead of stonith-timeout"), N_ 644 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal." N_ 649 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the 'on' command within the timeout period"), N_ 650 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 657 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of \'list\'"), N_ 658 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones." N_ 663 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for list actions instead of stonith-timeout"), N_ 664 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal." N_ 669 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the \'list\' command within the timeout period"), N_ 670 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 677 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of \'monitor\'"), N_ 678 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones." N_ 683 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for monitor actions instead of stonith-timeout"), N_ 684 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal.\n" N_ 689 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the \'monitor\' command within the timeout period"), N_ 690 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 697 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: An alternate command to run instead of \'status\'"), N_ 698 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support the standard commands or may provide additional ones." N_ 703 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: Specify an alternate timeout to use for status actions instead of stonith-timeout"), N_ 704 daemons/fenced/pacemaker-fenced.c N_("Some devices need much more/less time to complete than normal." N_ 709 daemons/fenced/pacemaker-fenced.c N_("Advanced use only: The maximum number of times to retry the \'status\' command within the timeout period"), N_ 710 daemons/fenced/pacemaker-fenced.c N_("Some devices do not support multiple connections." N_ 719 daemons/fenced/pacemaker-fenced.c const char *desc_short = N_("Instance attributes available for all " N_ 721 daemons/fenced/pacemaker-fenced.c const char *desc_long = N_("Instance attributes available for all \"stonith\"-" N_ 734 daemons/fenced/pacemaker-fenced.c N_("Deprecated (will be removed in a future release)"), NULL }, N_ 737 daemons/fenced/pacemaker-fenced.c stand_alone_cpg_cb, N_("Intended for use in regression testing only"), NULL }, N_ 740 daemons/fenced/pacemaker-fenced.c &options.log_files, N_("Send logs to the additional named logfile"), NULL }, N_ 875 lib/cib/cib_utils.c N_("Enable Access Control Lists (ACLs) for the CIB"), N_ 881 lib/cib/cib_utils.c N_("Maximum IPC message backlog before disconnecting a cluster daemon"), N_ 882 lib/cib/cib_utils.c N_("Raise this if log has \"Evicting client\" messages for cluster daemon" N_ 70 lib/common/cmdline.c N_("Display software version and exit"), N_ 73 lib/common/cmdline.c N_("Increase debug output (may be specified multiple times)"), N_ 92 lib/common/cmdline.c N_("FORMAT") }, N_ 94 lib/common/cmdline.c N_( "Specify file name for output (or \"-\" for stdout)"), N_("DEST") }, N_ 100 lib/common/cmdline.c *output_group = g_option_group_new("output", N_("Output Options:"), N_("Show output help"), NULL, NULL); N_ 40 lib/pengine/common.c N_("What to do when the cluster does not have quorum"), N_ 46 lib/pengine/common.c N_("Whether resources can run on any node by default"), N_ 52 lib/pengine/common.c N_("Whether the cluster should refrain from monitoring, starting, " N_ 59 lib/pengine/common.c N_("Whether a start failure should prevent a resource from being " N_ 61 lib/pengine/common.c N_("When true, the cluster will immediately ban a resource from a node " N_ 68 lib/pengine/common.c N_("Whether the cluster should check for active resources during start-up"), N_ 74 lib/pengine/common.c N_("Whether to lock resources to a cleanly shut down node"), N_ 75 lib/pengine/common.c N_("When true, resources active on a node when it is cleanly shut down " N_ 87 lib/pengine/common.c N_("Do not lock resources to a cleanly shut down node longer than " N_ 89 lib/pengine/common.c N_("If shutdown-lock is true and this is set to a nonzero time " N_ 99 lib/pengine/common.c N_("*** Advanced Use Only *** " N_ 101 lib/pengine/common.c N_("If false, unresponsive nodes are immediately assumed to be harmless, " N_ 109 lib/pengine/common.c N_("Action to send to fence device when a node needs to be fenced " N_ 116 lib/pengine/common.c N_("*** Advanced Use Only *** Unused by Pacemaker"), N_ 117 lib/pengine/common.c N_("This value is not used by Pacemaker, but is kept for backward " N_ 123 lib/pengine/common.c N_("Whether watchdog integration is enabled"), N_ 124 lib/pengine/common.c N_("This is set automatically by the cluster according to whether SBD " N_ 134 lib/pengine/common.c N_("Allow performing fencing operations in parallel"), N_ 140 lib/pengine/common.c N_("*** Advanced Use Only *** Whether to fence unseen nodes at start-up"), N_ 141 lib/pengine/common.c N_("Setting this to false may lead to a \"split-brain\" situation," N_ 147 lib/pengine/common.c N_("Apply fencing delay targeting the lost nodes with the highest total resource priority"), N_ 148 lib/pengine/common.c N_("Apply specified delay for the fencings that are targeting the lost " N_ 164 lib/pengine/common.c N_("How long to wait for a node that has joined the cluster to join " N_ 166 lib/pengine/common.c N_("Fence nodes that do not join the controller process group within " N_ 175 lib/pengine/common.c N_("Maximum time for node-to-node communication"), N_ 176 lib/pengine/common.c N_("The node elected Designated Controller (DC) will consider an action " N_ 185 lib/pengine/common.c N_("Maximum number of jobs that the cluster may execute in parallel " N_ 187 lib/pengine/common.c N_("The \"correct\" value will depend on the speed and load of your " N_ 195 lib/pengine/common.c N_("The number of live migration actions that the cluster is allowed " N_ 203 lib/pengine/common.c N_("Whether the cluster should stop all active resources"), N_ 209 lib/pengine/common.c N_("Whether to stop resources that were removed from the configuration"), N_ 215 lib/pengine/common.c N_("Whether to cancel recurring actions removed from the configuration"), N_ 221 lib/pengine/common.c N_("*** Deprecated *** Whether to remove stopped resources from " N_ 223 lib/pengine/common.c N_("Values other than default are poorly tested and potentially dangerous." N_ 231 lib/pengine/common.c N_("The number of scheduler inputs resulting in errors to save"), N_ 232 lib/pengine/common.c N_("Zero to disable, -1 to store unlimited.") N_ 237 lib/pengine/common.c N_("The number of scheduler inputs resulting in warnings to save"), N_ 238 lib/pengine/common.c N_("Zero to disable, -1 to store unlimited.") N_ 243 lib/pengine/common.c N_("The number of scheduler inputs without errors or warnings to save"), N_ 244 lib/pengine/common.c N_("Zero to disable, -1 to store unlimited.") N_ 254 lib/pengine/common.c N_("How cluster should react to node health attributes"), N_ 255 lib/pengine/common.c N_("Requires external entities to create node attributes (named with " N_ 262 lib/pengine/common.c N_("Base health score assigned to a node"), N_ 263 lib/pengine/common.c N_("Only used when \"node-health-strategy\" is set to \"progressive\".") N_ 268 lib/pengine/common.c N_("The score to use for a node health attribute whose value is \"green\""), N_ 269 lib/pengine/common.c N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") N_ 274 lib/pengine/common.c N_("The score to use for a node health attribute whose value is \"yellow\""), N_ 275 lib/pengine/common.c N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") N_ 280 lib/pengine/common.c N_("The score to use for a node health attribute whose value is \"red\""), N_ 281 lib/pengine/common.c N_("Only used when \"node-health-strategy\" is set to \"custom\" or \"progressive\".") N_ 289 lib/pengine/common.c N_("How the cluster should allocate resources to nodes"), N_ 81 maint/gnulib/lib/argp-parse.c {"help", '?', 0, 0, N_("give this help list"), -1}, N_ 82 maint/gnulib/lib/argp-parse.c {"usage", OPT_USAGE, 0, 0, N_("give a short usage message"), 0}, N_ 83 maint/gnulib/lib/argp-parse.c {"program-name",OPT_PROGNAME, N_("NAME"), OPTION_HIDDEN, N_ 84 maint/gnulib/lib/argp-parse.c N_("set the program name"), 0}, N_ 85 maint/gnulib/lib/argp-parse.c {"HANG", OPT_HANG, N_("SECS"), OPTION_ARG_OPTIONAL | OPTION_HIDDEN, N_ 86 maint/gnulib/lib/argp-parse.c N_("hang for SECS seconds (default 3600)"), 0}, N_ 143 maint/gnulib/lib/argp-parse.c {"version", 'V', 0, 0, N_("print program version"), -1}, N_ 759 maint/gnulib/lib/argp-parse.c N_("(PROGRAM ERROR) Option should have been recognized!?"); N_ 57 maint/gnulib/lib/gai_strerror.c { EAI_ADDRFAMILY, N_("Address family for hostname not supported") }, N_ 58 maint/gnulib/lib/gai_strerror.c { EAI_AGAIN, N_("Temporary failure in name resolution") }, N_ 59 maint/gnulib/lib/gai_strerror.c { EAI_BADFLAGS, N_("Bad value for ai_flags") }, N_ 60 maint/gnulib/lib/gai_strerror.c { EAI_FAIL, N_("Non-recoverable failure in name resolution") }, N_ 61 maint/gnulib/lib/gai_strerror.c { EAI_FAMILY, N_("ai_family not supported") }, N_ 62 maint/gnulib/lib/gai_strerror.c { EAI_MEMORY, N_("Memory allocation failure") }, N_ 63 maint/gnulib/lib/gai_strerror.c { EAI_NODATA, N_("No address associated with hostname") }, N_ 64 maint/gnulib/lib/gai_strerror.c { EAI_NONAME, N_("Name or service not known") }, N_ 65 maint/gnulib/lib/gai_strerror.c { EAI_SERVICE, N_("Servname not supported for ai_socktype") }, N_ 66 maint/gnulib/lib/gai_strerror.c { EAI_SOCKTYPE, N_("ai_socktype not supported") }, N_ 67 maint/gnulib/lib/gai_strerror.c { EAI_SYSTEM, N_("System error") }, N_ 68 maint/gnulib/lib/gai_strerror.c { EAI_OVERFLOW, N_("Argument buffer too small") }, N_ 70 maint/gnulib/lib/gai_strerror.c { EAI_INPROGRESS, N_("Processing request in progress") }, N_ 71 maint/gnulib/lib/gai_strerror.c { EAI_CANCELED, N_("Request canceled") }, N_ 72 maint/gnulib/lib/gai_strerror.c { EAI_NOTCANCELED, N_("Request not canceled") }, N_ 73 maint/gnulib/lib/gai_strerror.c { EAI_ALLDONE, N_("All requests done") }, N_ 74 maint/gnulib/lib/gai_strerror.c { EAI_INTR, N_("Interrupted by a signal") }, N_ 75 maint/gnulib/lib/gai_strerror.c { EAI_IDN_ENCODE, N_("Parameter string not correctly encoded") } N_ 355 maint/gnulib/lib/quotearg.c left_quote = gettext_quote (N_("`"), quoting_style); N_ 356 maint/gnulib/lib/quotearg.c right_quote = gettext_quote (N_("'"), quoting_style); N_ 150 maint/gnulib/lib/rpmatch.c yesexpr = localized_pattern (N_("^[yY]"), YESEXPR, posixly_correct); N_ 163 maint/gnulib/lib/rpmatch.c noexpr = localized_pattern (N_("^[nN]"), NOEXPR, posixly_correct); N_ 31 maint/gnulib/lib/siglist.h init_sig (SIGHUP, "HUP", N_("Hangup")) N_ 34 maint/gnulib/lib/siglist.h init_sig (SIGINT, "INT", N_("Interrupt")) N_ 37 maint/gnulib/lib/siglist.h init_sig (SIGQUIT, "QUIT", N_("Quit")) N_ 40 maint/gnulib/lib/siglist.h init_sig (SIGILL, "ILL", N_("Illegal instruction")) N_ 43 maint/gnulib/lib/siglist.h init_sig (SIGTRAP, "TRAP", N_("Trace/breakpoint trap")) N_ 46 maint/gnulib/lib/siglist.h init_sig (SIGABRT, "ABRT", N_("Aborted")) N_ 49 maint/gnulib/lib/siglist.h init_sig (SIGFPE, "FPE", N_("Floating point exception")) N_ 52 maint/gnulib/lib/siglist.h init_sig (SIGKILL, "KILL", N_("Killed")) N_ 55 maint/gnulib/lib/siglist.h init_sig (SIGBUS, "BUS", N_("Bus error")) N_ 58 maint/gnulib/lib/siglist.h init_sig (SIGSEGV, "SEGV", N_("Segmentation fault")) N_ 61 maint/gnulib/lib/siglist.h init_sig (SIGPIPE, "PIPE", N_("Broken pipe")) N_ 64 maint/gnulib/lib/siglist.h init_sig (SIGALRM, "ALRM", N_("Alarm clock")) N_ 67 maint/gnulib/lib/siglist.h init_sig (SIGTERM, "TERM", N_("Terminated")) N_ 70 maint/gnulib/lib/siglist.h init_sig (SIGURG, "URG", N_("Urgent I/O condition")) N_ 73 maint/gnulib/lib/siglist.h init_sig (SIGSTOP, "STOP", N_("Stopped (signal)")) N_ 76 maint/gnulib/lib/siglist.h init_sig (SIGTSTP, "TSTP", N_("Stopped")) N_ 79 maint/gnulib/lib/siglist.h init_sig (SIGCONT, "CONT", N_("Continued")) N_ 82 maint/gnulib/lib/siglist.h init_sig (SIGCHLD, "CHLD", N_("Child exited")) N_ 85 maint/gnulib/lib/siglist.h init_sig (SIGTTIN, "TTIN", N_("Stopped (tty input)")) N_ 88 maint/gnulib/lib/siglist.h init_sig (SIGTTOU, "TTOU", N_("Stopped (tty output)")) N_ 91 maint/gnulib/lib/siglist.h init_sig (SIGIO, "IO", N_("I/O possible")) N_ 94 maint/gnulib/lib/siglist.h init_sig (SIGXCPU, "XCPU", N_("CPU time limit exceeded")) N_ 97 maint/gnulib/lib/siglist.h init_sig (SIGXFSZ, "XFSZ", N_("File size limit exceeded")) N_ 100 maint/gnulib/lib/siglist.h init_sig (SIGVTALRM, "VTALRM", N_("Virtual timer expired")) N_ 103 maint/gnulib/lib/siglist.h init_sig (SIGPROF, "PROF", N_("Profiling timer expired")) N_ 106 maint/gnulib/lib/siglist.h init_sig (SIGWINCH, "WINCH", N_("Window changed")) N_ 109 maint/gnulib/lib/siglist.h init_sig (SIGUSR1, "USR1", N_("User defined signal 1")) N_ 112 maint/gnulib/lib/siglist.h init_sig (SIGUSR2, "USR2", N_("User defined signal 2")) N_ 117 maint/gnulib/lib/siglist.h init_sig (SIGEMT, "EMT", N_("EMT trap")) N_ 120 maint/gnulib/lib/siglist.h init_sig (SIGSYS, "SYS", N_("Bad system call")) N_ 123 maint/gnulib/lib/siglist.h init_sig (SIGSTKFLT, "STKFLT", N_("Stack fault")) N_ 126 maint/gnulib/lib/siglist.h init_sig (SIGINFO, "INFO", N_("Information request")) N_ 128 maint/gnulib/lib/siglist.h init_sig (SIGPWR, "PWR", N_("Power failure")) N_ 131 maint/gnulib/lib/siglist.h init_sig (SIGLOST, "LOST", N_("Resource lost")) N_ 102 maint/gnulib/lib/unicodeio.c return failure (code, N_("iconv function not usable"), callback_arg); N_ 104 maint/gnulib/lib/unicodeio.c return failure (code, N_("iconv function not available"), callback_arg); N_ 111 maint/gnulib/lib/unicodeio.c return failure (code, N_("character out of range"), callback_arg); N_ 106 maint/gnulib/lib/userspec.c static const char *E_invalid_user = N_("invalid user"); N_ 107 maint/gnulib/lib/userspec.c static const char *E_invalid_group = N_("invalid group"); N_ 108 maint/gnulib/lib/userspec.c static const char *E_bad_spec = N_("invalid spec"); N_ 63 maint/gnulib/lib/xstrtol-error.c msgid = N_("invalid %s%s argument '%s'"); N_ 68 maint/gnulib/lib/xstrtol-error.c msgid = N_("invalid suffix in %s%s argument '%s'"); N_ 72 maint/gnulib/lib/xstrtol-error.c msgid = N_("%s%s argument '%s' too large"); N_ 75 maint/gnulib/tests/test-argmatch.c { "no", N_("never make backups (even if --backup is given)") }, N_ 76 maint/gnulib/tests/test-argmatch.c { "numbered", N_("make numbered backups") }, N_ 77 maint/gnulib/tests/test-argmatch.c { "existing", N_("numbered if numbered backups exist, simple otherwise") }, N_ 78 maint/gnulib/tests/test-argmatch.c { "simple", N_("always make simple backups") }, N_ 103 maint/gnulib/tests/test-argmatch.c N_("\