|
batch-limit
|
30
|
The number of jobs that the TE is allowed to execute in parallel. The "correct" value will depend on the speed and load of your network and cluster nodes.
|
|
migration-limit
|
-1 (unlimited)
|
The number of migration jobs that the TE is allowed to execute in parallel on a node.
|
|
no-quorum-policy
|
stop
|
What to do when the cluster does not have quorum. Allowed values:
* ignore - continue all resource management
* freeze - continue resource management, but don’t recover resources from nodes not in the affected partition
* stop - stop all resources in the affected cluster partition
* suicide - fence all nodes in the affected cluster partition
|
|
symmetric-cluster
|
TRUE
|
Can all resources run on any node by default?
|
|
stonith-enabled
|
TRUE
|
Should failed nodes and nodes with resources that can’t be stopped be shot? If you value your data, set up a STONITH device and enable this.
If true, or unset, the cluster will refuse to start resources unless one or more STONITH resources have been configured also.
|
|
stonith-action
|
reboot
|
Action to send to STONITH device. Allowed values: reboot, off. The value poweroff is also allowed, but is only used for legacy devices.
|
|
cluster-delay
|
60s
|
Round trip delay over the network (excluding action execution). The "correct" value will depend on the speed and load of your network and cluster nodes.
|
|
stop-orphan-resources
|
TRUE
|
Should deleted resources be stopped?
|
|
stop-orphan-actions
|
TRUE
|
Should deleted actions be cancelled?
|
|
start-failure-is-fatal
|
TRUE
|
When set to FALSE, the cluster will instead use the resource’s failcount and value for resource-failure-stickiness.
|
|
pe-error-series-max
|
-1 (all)
|
The number of PE inputs resulting in ERRORs to save. Used when reporting problems.
|
|
pe-warn-series-max
|
-1 (all)
|
The number of PE inputs resulting in WARNINGs to save. Used when reporting problems.
|
|
pe-input-series-max
|
-1 (all)
|
The number of "normal" PE inputs to save. Used when reporting problems.
|
