# stonith_admin --metadata -a fence_ipmilan

<?xml version="1.0" ?>
<resource-agent name="fence_ipmilan" shortdesc="Fence agent for IPMI over LAN">
<longdesc>
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/).

To use fence_ipmilan with HP iLO 3 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 seconds (power_wait=4 / -T 4)</longdesc>
<parameters>
	<parameter name="auth" unique="1">
		<getopt mixed="-A" />
		<content type="string" />
		<shortdesc lang="en">IPMI Lan Auth type (md5, password, or none)</shortdesc>
	</parameter>
	<parameter name="ipaddr" unique="1">
		<getopt mixed="-a" />
		<content type="string" />
		<shortdesc lang="en">IPMI Lan IP to talk to</shortdesc>
	</parameter>
	<parameter name="passwd" unique="1">
		<getopt mixed="-p" />
		<content type="string" />
		<shortdesc lang="en">Password (if required) to control power on IPMI device</shortdesc>
	</parameter>
	<parameter name="passwd_script" unique="1">
		<getopt mixed="-S" />
		<content type="string" />
		<shortdesc lang="en">Script to retrieve password (if required)</shortdesc>
	</parameter>
	<parameter name="lanplus" unique="1">
		<getopt mixed="-P" />
		<content type="boolean" />
		<shortdesc lang="en">Use Lanplus</shortdesc>
	</parameter>
	<parameter name="login" unique="1">
		<getopt mixed="-l" />
		<content type="string" />
		<shortdesc lang="en">Username/Login (if required) to control power on IPMI device</shortdesc>
	</parameter>
	<parameter name="action" unique="1">
		<getopt mixed="-o" />
		<content type="string" default="reboot"/>
		<shortdesc lang="en">Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata</shortdesc>
	</parameter>
	<parameter name="timeout" unique="1">
		<getopt mixed="-t" />
		<content type="string" />
		<shortdesc lang="en">Timeout (sec) for IPMI operation</shortdesc>
	</parameter>
	<parameter name="cipher" unique="1">
		<getopt mixed="-C" />
		<content type="string" />
		<shortdesc lang="en">Ciphersuite to use (same as ipmitool -C parameter)</shortdesc>
	</parameter>
	<parameter name="method" unique="1">
		<getopt mixed="-M" />
		<content type="string" default="onoff"/>
		<shortdesc lang="en">Method to fence (onoff or cycle)</shortdesc>
	</parameter>
	<parameter name="power_wait" unique="1">
		<getopt mixed="-T" />
		<content type="string" default="2"/>
		<shortdesc lang="en">Wait X seconds after on/off operation</shortdesc>
	</parameter>
	<parameter name="delay" unique="1">
		<getopt mixed="-f" />
		<content type="string" />
		<shortdesc lang="en">Wait X seconds before fencing is started</shortdesc>
	</parameter>
	<parameter name="verbose" unique="1">
		<getopt mixed="-v" />
		<content type="boolean" />
		<shortdesc lang="en">Verbose mode</shortdesc>
	</parameter>
</parameters>
<actions>
	<action name="on" />
	<action name="off" />
	<action name="reboot" />
	<action name="status" />
	<action name="diag" />
	<action name="list" />
	<action name="monitor" />
	<action name="metadata" />
</actions>
</resource-agent>