4. Start and Verify Cluster¶
4.1. Start the Cluster¶
Now that Corosync is configured, it is time to start the cluster.
The command below will start the corosync and pacemaker services on
both nodes in the cluster.
[root@pcmk-1 ~]# pcs cluster start --all
pcmk-1: Starting Cluster...
pcmk-2: Starting Cluster...
Note
An alternative to using the pcs cluster start --all command
is to issue either of the below command sequences on each node in the
cluster separately:
# pcs cluster start
Starting Cluster...
or
# systemctl start corosync.service
# systemctl start pacemaker.service
Important
In this example, we are not enabling the corosync and pacemaker
services to start at boot. If a cluster node fails or is rebooted, you will
need to run pcs cluster start [<NODENAME> | --all] to start the cluster
on it. While you can enable the services to start at boot (for example,
using pcs cluster enable [<NODENAME> | --all]), requiring a manual
start of cluster services gives you the opportunity to do a post-mortem
investigation of a node failure before returning it to the cluster.
4.2. Verify Corosync Installation¶
First, use corosync-cfgtool to check whether cluster communication is happy:
[root@pcmk-1 ~]# corosync-cfgtool -s
Local node ID 1, transport knet
LINK ID 0 udp
addr = 192.168.122.101
status:
nodeid: 1: localhost
nodeid: 2: connected
We can see here that everything appears normal with our fixed IP address (not a
127.0.0.x loopback address) listed as the addr, and localhost and
connected for the statuses of nodeid 1 and nodeid 2, respectively.
If you see something different, you might want to start by checking the node’s network, firewall, and SELinux configurations.
Next, check the membership and quorum APIs:
[root@pcmk-1 ~]# corosync-cmapctl | grep members
runtime.members.1.config_version (u64) = 0
runtime.members.1.ip (str) = r(0) ip(192.168.122.101)
runtime.members.1.join_count (u32) = 1
runtime.members.1.status (str) = joined
runtime.members.2.config_version (u64) = 0
runtime.members.2.ip (str) = r(0) ip(192.168.122.102)
runtime.members.2.join_count (u32) = 1
runtime.members.2.status (str) = joined
[root@pcmk-1 ~]# pcs status corosync
Membership information
----------------------
Nodeid Votes Name
1 1 pcmk-1 (local)
2 1 pcmk-2
You should see both nodes have joined the cluster.
4.3. Verify Pacemaker Installation¶
Now that we have confirmed that Corosync is functional, we can check the rest of the stack. Pacemaker has already been started, so verify the necessary processes are running:
[root@pcmk-1 ~]# ps axf
PID TTY STAT TIME COMMAND
2 ? S 0:00 [kthreadd]
...lots of processes...
17121 ? SLsl 0:01 /usr/sbin/corosync -f
17133 ? Ss 0:00 /usr/sbin/pacemakerd
17134 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-based
17135 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-fenced
17136 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-execd
17137 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-attrd
17138 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-schedulerd
17139 ? Ss 0:00 \_ /usr/libexec/pacemaker/pacemaker-controld
If that looks OK, check the pcs status output:
[root@pcmk-1 ~]# pcs status
Cluster name: mycluster
WARNINGS:
No stonith devices and stonith-enabled is not false
Cluster Summary:
* Stack: corosync
* Current DC: pcmk-2 (version 2.1.2-4.el9-ada5c3b36e2) - partition with quorum
* Last updated: Wed Jul 27 00:09:55 2022
* Last change: Wed Jul 27 00:07:08 2022 by hacluster via crmd on pcmk-2
* 2 nodes configured
* 0 resource instances configured
Node List:
* Online: [ pcmk-1 pcmk-2 ]
Full List of Resources:
* No resources
Daemon Status:
corosync: active/disabled
pacemaker: active/disabled
pcsd: active/enabled
Finally, ensure there are no start-up errors from corosync or pacemaker
(aside from messages relating to not having STONITH configured, which are OK at
this point):
[root@pcmk-1 ~]# journalctl -b | grep -i error
Note
Other operating systems may report startup errors in other locations
(for example, /var/log/messages).
Repeat these checks on the other node. The results should be the same.
4.4. Explore the Existing Configuration¶
For those who are not of afraid of XML, you can see the raw cluster
configuration and status by using the pcs cluster cib command.
The last XML you’ll see in this document
[root@pcmk-1 ~]# pcs cluster cib
<cib crm_feature_set="3.13.0" validate-with="pacemaker-3.8" epoch="5" num_updates="4" admin_epoch="0" cib-last-written="Wed Jul 27 00:07:08 2022" update-origin="pcmk-2" update-client="crmd" update-user="hacluster" have-quorum="1" dc-uuid="2">
<configuration>
<crm_config>
<cluster_property_set id="cib-bootstrap-options">
<nvpair id="cib-bootstrap-options-have-watchdog" name="have-watchdog" value="false"/>
<nvpair id="cib-bootstrap-options-dc-version" name="dc-version" value="2.1.2-4.el9-ada5c3b36e2"/>
<nvpair id="cib-bootstrap-options-cluster-infrastructure" name="cluster-infrastructure" value="corosync"/>
<nvpair id="cib-bootstrap-options-cluster-name" name="cluster-name" value="mycluster"/>
</cluster_property_set>
</crm_config>
<nodes>
<node id="1" uname="pcmk-1"/>
<node id="2" uname="pcmk-2"/>
</nodes>
<resources/>
<constraints/>
<rsc_defaults>
<meta_attributes id="build-resource-defaults">
<nvpair id="build-resource-stickiness" name="resource-stickiness" value="1"/>
</meta_attributes>
</rsc_defaults>
</configuration>
<status>
<node_state id="2" uname="pcmk-2" in_ccm="true" crmd="online" crm-debug-origin="do_state_transition" join="member" expected="member">
<lrm id="2">
<lrm_resources/>
</lrm>
</node_state>
<node_state id="1" uname="pcmk-1" in_ccm="true" crmd="online" crm-debug-origin="do_state_transition" join="member" expected="member">
<lrm id="1">
<lrm_resources/>
</lrm>
</node_state>
</status>
</cib>
Before we make any changes, it’s a good idea to check the validity of the configuration.
[root@pcmk-1 ~]# pcs cluster verify --full
Error: invalid cib:
(unpack_resources) error: Resource start-up disabled since no STONITH resources have been defined
(unpack_resources) error: Either configure some or disable STONITH with the stonith-enabled option
(unpack_resources) error: NOTE: Clusters with shared data need STONITH to ensure data integrity
crm_verify: Errors found during check: config not valid
Error: Errors have occurred, therefore pcs is unable to continue
As you can see, the tool has found some errors. The cluster will not start any resources until we configure STONITH.