10. Alert Agents

10.1. Using the Sample Alert Agents

Pacemaker provides several sample alert agents, installed in /usr/share/pacemaker/alerts by default.

While these sample scripts may be copied and used as-is, they are provided mainly as templates to be edited to suit your purposes. See their source code for the full set of instance attributes they support.

Sending cluster events as SNMP v2c traps

<configuration>
   <alerts>
      <alert id="snmp_alert" path="/path/to/alert_snmp.sh">
         <instance_attributes id="config_for_alert_snmp">
            <nvpair id="trap_node_states" name="trap_node_states"
                    value="all"/>
         </instance_attributes>
         <meta_attributes id="config_for_timestamp">
            <nvpair id="ts_fmt" name="timestamp-format"
                    value="%Y-%m-%d,%H:%M:%S.%01N"/>
         </meta_attributes>
         <recipient id="snmp_destination" value="192.168.1.2"/>
      </alert>
   </alerts>
</configuration>

Note

SNMP alert agent attributes

The timestamp-format meta-attribute should always be set to %Y-%m-%d,%H:%M:%S.%01N when using the SNMP agent, to match the SNMP standard.

The SNMP agent provides a number of instance attributes in addition to the one used in the example above. The most useful are trap_version, which defaults to 2c, and trap_community, which defaults to public. See the source code for more details.

Sending cluster events as SNMP v3 traps

<configuration>
   <alerts>
      <alert id="snmp_alert" path="/path/to/alert_snmp.sh">
         <instance_attributes id="config_for_alert_snmp">
            <nvpair id="trap_node_states" name="trap_node_states"
                    value="all"/>
            <nvpair id="trap_version" name="trap_version" value="3"/>
            <nvpair id="trap_community" name="trap_community" value=""/>
            <nvpair id="trap_options" name="trap_options"
                    value="-l authNoPriv -a MD5 -u testuser -A secret1"/>
         </instance_attributes>
         <meta_attributes id="config_for_timestamp">
            <nvpair id="ts_fmt" name="timestamp-format"
                    value="%Y-%m-%d,%H:%M:%S.%01N"/>
         </meta_attributes>
         <recipient id="snmp_destination" value="192.168.1.2"/>
      </alert>
   </alerts>
</configuration>

Note

SNMP v3 trap configuration

To use SNMP v3, trap_version must be set to 3. trap_community will be ignored.

The example above uses the trap_options instance attribute to override the security level, authentication protocol, authentication user, and authentication password from snmp.conf. These will be passed to the snmptrap command. Passing the password on the command line is considered insecure; specify authentication and privacy options suitable for your environment.

Sending cluster events as e-mails

<configuration>
   <alerts>
      <alert id="smtp_alert" path="/path/to/alert_smtp.sh">
         <instance_attributes id="config_for_alert_smtp">
            <nvpair id="email_sender" name="email_sender"
                    value="donotreply@example.com"/>
         </instance_attributes>
         <recipient id="smtp_destination" value="admin@example.com"/>
      </alert>
   </alerts>
</configuration>

10.2. Writing an Alert Agent

Environment variables passed to alert agents

Environment Variable	Description
CRM_alert_kind	The type of alert (node, fencing, resource, or attribute)
CRM_alert_node	Name of affected node
CRM_alert_node_sequence	A sequence number increased whenever an alert is being issued on the local node, which can be used to reference the order in which alerts have been issued by Pacemaker. An alert for an event that happened later in time reliably has a higher sequence number than alerts for earlier events. Be aware that this number has no cluster-wide meaning.
CRM_alert_recipient	The configured recipient
CRM_alert_timestamp	A timestamp created prior to executing the agent, in the format specified by the timestamp-format meta-attribute. This allows the agent to have a reliable, high-precision time of when the event occurred, regardless of when the agent itself was invoked (which could potentially be delayed due to system load, etc.).
CRM_alert_timestamp_epoch	The same time as CRM_alert_timestamp, expressed as the integer number of seconds since January 1, 1970. This (along with CRM_alert_timestamp_usec) can be useful for alert agents that need to format time in a specific way rather than let the user configure it.
CRM_alert_timestamp_usec	The same time as CRM_alert_timestamp, expressed as the integer number of microseconds since CRM_alert_timestamp_epoch.
CRM_alert_version	The version of Pacemaker sending the alert
CRM_alert_desc	Detail about event. For node alerts, this is the node’s current state (member or lost). For fencing alerts, this is a summary of the requested fencing operation, including origin, target, and fencing operation error code, if any. For resource alerts, this is a readable string equivalent of CRM_alert_status.
CRM_alert_nodeid	ID of node whose status changed (provided with node alerts only)
CRM_alert_rc	The numerical return code of the fencing or resource operation (provided with fencing and resource alerts only)
CRM_alert_task	The requested fencing or resource operation (provided with fencing and resource alerts only)
CRM_alert_exec_time	The (wall-clock) time, in milliseconds, that it took to execute the action. If the action timed out, CRM_alert_status will be 2, CRM_alert_desc will be “Timed Out”, and this value will be the action timeout. May not be supported on all platforms. (resource alerts only) (since 2.0.1)
CRM_alert_interval	The interval of the resource operation (resource alerts only)
CRM_alert_rsc	The name of the affected resource (resource alerts only)
CRM_alert_status	A numerical code used by Pacemaker to represent the operation result (resource alerts only)
CRM_alert_target_rc	The expected numerical return code of the operation (resource alerts only)
CRM_alert_attribute_name	The name of the node attribute that changed (attribute alerts only)
CRM_alert_attribute_value	The new value of the node attribute that changed (attribute alerts only)

Special concerns when writing alert agents:

• Alert agents may be called with no recipient (if none is configured), so the agent must be able to handle this situation, even if it only exits in that case. (Users may modify the configuration in stages, and add a recipient later.)
• If more than one recipient is configured for an alert, the alert agent will be called once per recipient. If an agent is not able to run concurrently, it should be configured with only a single recipient. The agent is free, however, to interpret the recipient as a list.
• When a cluster event occurs, all alerts are fired off at the same time as separate processes. Depending on how many alerts and recipients are configured, and on what is done within the alert agents, a significant load burst may occur. The agent could be written to take this into consideration, for example by queueing resource-intensive actions into some other instance, instead of directly executing them.
• Alert agents are run as the hacluster user, which has a minimal set of permissions. If an agent requires additional privileges, it is recommended to configure sudo to allow the agent to run the necessary commands as another user with the appropriate privileges.
• As always, take care to validate and sanitize user-configured parameters, such as CRM_alert_timestamp (whose content is specified by the user-configured timestamp-format), CRM_alert_recipient, and all instance attributes. Mostly this is needed simply to protect against configuration errors, but if some user can modify the CIB without having hacluster access to the cluster nodes, it is a potential security concern as well, to avoid the possibility of code injection.

Note

ocf:pacemaker:ClusterMon compatibility

The alerts interface is designed to be backward compatible with the external scripts interface used by the ocf:pacemaker:ClusterMon resource, which is now deprecated. To preserve this compatibility, the environment variables passed to alert agents are available prepended with CRM_notify_ as well as CRM_alert_. One break in compatibility is that ClusterMon ran external scripts as the root user, while alert agents are run as the hacluster user.